Jump to content

Shakey Start

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by Shakey Start

  1. Nice, large Specialized BIKE SHIPPING BOX, with lots of padding! Must pick up before Monday AM, 7/23.
  2. Still have a box-O-tires, all 29” and all decent. Yes, the whole box, maybe 8-10.
  3. Yes, they are all left, ie it was raining and no one wanted to get wet! πŸ˜‰
  4. Clubs separately. Have several wedgies!
  5. Box-0-Tires - All 29”, mostly around 2.35, all in good shape and none with cuts or punctures (as I remember)! Spin Doctor bike stand - from this thread and was going to use as wash stand, but don’t want to move it, so out it goes. Also, if anyone here is into golf (I doubt it) I have a bunch of clubs, putters, drivers, irons, etc. going CHEAP!
  6. Got it done with my modified 1-1/4” socket, but thanks for the offer!
  7. Panic over, I found that 1-1/4” socket is/was pretty close to 32mm, so I took the advice and belt sanded it down. Not elegant but the spring has been changed! If anyone needs it, lemme know! BTW, that Push AC3 conversion kit is pretty sweet.
  8. Need to switch out my spring on my 36 which needs a special socket...ok not so special, but I don’t have even a non-special 32 mm socket. Anyone have one they want to sell, or...
  9. Thanks for the links. Yep, this is for a really old Ritchey stem.
  10. Have a project that needs a handlebar. Normal width is fine, but needs at least a 2” rise.
  11. Txn, you’re right...my bad. 😞 And the win goes to ......BRIAN’S USED TIRES!
  12. Paying it forward to a good home: Just cleaning house. I have over a dozen tires, mostly 29”, but a few 700c roadies, and a few 27.5’s, I think. They are useable, no holes, but may not be tubeless ready. Most are NN type. All or none please! 😐 IMG_3602-2.HEIC
  13. Just cleaning house. I have over a dozen tires, mostly 29”, but a few 700c roadies, and a few 27.5’s, I think. They are useable, no holes, but may not be tubeless ready. Most are NN type. IMG_3602.HEIC
  14. Just cleaning house. I have over a dozen tires, mostly 29”, but a few 700c roadies, and a few 27.5’s, I think. They are useable, no holes, but may not be tubeless ready. Most are NN type.
  15. Ok, went to FB and copied the paragraph: "Russell park has been closed this last week due to open in February for some serious upgrades and maintenance." So , its Russell Park, NOT Cedar Breaks. Sorry for the earlier wrong info.
  16. Check out the Facebook posting. I think that Cedar Breaks Park is closed. I may head out Sat a.m. myself!
  17. Anyone want to get rid of a mechanical set?
  18. Yes, we always ride from Cedar Breaks Park, riding clockwise.
  19. Ok, makes sense now, but if your rear wheel is off center by 3mm, wouldn't you just go around in circles? πŸ˜‰
  20. Thanks for the reply. So, (rear wheel) if I use a spacer on each side, the chain line will be off by 3mm, correct? I was hoping not to re-dish because I use the wheelset on a non-boost bike also. I can see some problems a brewing (shifting), given my requirements.
  21. I need to do the same conversion. The only issue I see is losing pieces when I switch wheelsets. Have you spent any time on the bike since, and your thoughts now?
  22. I'm with you. I think the scooters should be required to place back in a designated paddock or get charged a recovery fee. Yes, it would probably affect the ridership that the scoot folks would balk at, but this stuff is totally out of control.
×
×
  • Create New...